One thing that most original Tron cabinets all have in common, aside from beat up side art, are faded plastics. After years of abuse from the blacklights, the ink desaturates and the distinct colors are lost. While there are high quality acrylic reproductions available, they are costly, and I wanted to see what I could do with materials (mostly) on hand. Thanks to Jeff Rothe, I found myself with a spare lower plastic, and it was time to experiment.
Here’s the before shot. Both lower pieces were in roughly the same condition; the original colors could be seen, but were extremely washed out when backlit. Of the highlighter colors I tested, only orange and yellow fluoresced vividly.
The tools. Rustoleum satin black (model paint was too thin), a tiny paint brush, and a new package of Bic brite liners.
My first step was to repaint all the areas where the light wasn’t supposed to shine through. This was the part that took the most time and care, as screwing up a line would be very obvious when the whole thing was backlit.
Once that was done, I let the plastics dry for several hours while Tina and I hit the gym and ate dinner. Who knew that Thanksgiving leftovers could be turned into a delicious Vietnamese meal (it’s true!).
This would be a good place for an in-progress photo, but I forgot to take one. Sorry.
The next step was pretty much like coloring in a boring coloring book. Aside from the center area, where the design gets a bit complicated, the lines were simply a matter of laying down the right color. I used the orange highlighter for the ah, orange/red parts, yellow over the green, and the not-so-fluorescent blue over the very faded blue areas.
After installed the painted plastic and swapping out the white blacklight for a regular ol’ blacklight (increasing the highlighter fluorescence), here is the final result:
Comparison photo!
Also note the fancy new GroovyGameGear reproduction handle.
